[B][CENTER]
Step 2: Unscrew the shift knob. This will allow you to remove the trim ring and boot. If your not comfortable removing it, you can work around it. If you remove the surround completely, re-install the shift knob, or cover the bare shift handle with a cloth. This will prevent it from scratching the face of the stereo once it’s pulled forward.
Step 32: Since you disconnected the airbag light on the right side of the stereo, you will have to rest it, or your airbag light will flash, which is REALLY annoying. Here is how to reset it:
If you have the airbag light blinking here is how to reset it:
1. Push the start button two times (Ignition on but engine not started).
2. Watch the airbag light closely. It will stay on for a few seconds. As soon as it blinks off (the start of the flashing), turn the key off QUICKLY.
3. Count to 5
4. Repeat steps 1-3 two more times until you have done the cycle three times.
5. Now turn the key on and watch the light. It will start blinking in a different, slower manner. This is diagnostic mode. You can let this run for a few seconds.
6. Now turn the key off again, Count to 5 again and turn back on. If the procedure worked, the airbag light will not be flashing.