Nissan 370Z Forum - View Single Post

w4kj4k · 02-19-2014, 01:37 AM

Hey guys, is there any tips or tricks to reaching that but on top of the spc front camber arm?

On my g35, I was able to easily loosen the spindle and pull down on the arm. However on the 370z... Pulling the arm from the spindle is a PITA.

I tried putting my foot on the caliper but my Coilovers maybe be too stiff. I'd prefer not to unbolt everything and adjust it.. There has to be a way to reach in there?

I'm about to go back in the garage and raise the coils and see of that makes any different on how I can reach the top nut.

Thanks in advance guys!

02-19-2014, 01:37 AM	#1 (permalink)
w4kj4k Base Member Join Date: Nov 2010 Location: Oklahoma City Posts: 220 Drives: 2012 PW Nismo Rep Power: 15	Adjusting front spc camber arm Hey guys, is there any tips or tricks to reaching that but on top of the spc front camber arm? On my g35, I was able to easily loosen the spindle and pull down on the arm. However on the 370z... Pulling the arm from the spindle is a PITA. I tried putting my foot on the caliper but my Coilovers maybe be too stiff. I'd prefer not to unbolt everything and adjust it.. There has to be a way to reach in there? I'm about to go back in the garage and raise the coils and see of that makes any different on how I can reach the top nut. Thanks in advance guys!