Quote:
Originally Posted by synolimit
So whats that mean for me? If I want zero toe rear, slight toe out front what do I do?
Your degree numbers are different than what Hunter is saying. But you said those numbers off a 19" wheel. He out in the Hunter I have 18's. So I'm assuming that's why mine are different than what you said? Doesn't really matter though since I know what I want. I could care less about what the specs are.
|
As I said earlier rim size does NOT affect angle measurements just distance measurements
Nope my spec numbers are from the factory manual hunters are wrong, that or it was a different type of alignment test and they fudged the numbers to get the alignment to actually be the same as factory (nissan says the car should be tested in unladden condition on a thrust type alignment machine) if you want them to set 0 toe rear then have them align the rear wheels to 0 degrees, slight toe out in the front on that machine would be -.05 to -.11
in the factory manual the front toe is IN 3minutes to IN 7 minutes