I updated the 1st page with the following
Is there anything else that I may need for install?
You will need a few things:
-You will need a spool of wire, some buttconnectors, and crimpers.
-10k resistor
-L7805 regulator or a 12v to 5v converter. I have run the L7805 for years and it is a couple of bucks. you may have a 12v to 5v if you run aftermarket sensors.
-Its also recommended that you have a laptop for easy configuration, but is not required if you have the digital adjuster.
-Patch harness (
370Z/G37 (VQ37VHR) ECU Wiring Harness)
You'll notice i took out the uprev, as misfire detection has not been a problem.
If you absolutely want a harness made, we might be able to work something out. Keep in mind that I can not give you a 100% plug and play harness as some of the wires get long (the ones going from the wheelsensors back to the main sensor for instanace). You will still need to tap into certain wires as well.
As for pricing I still need to confirm nothing has changed. I would say if you budgeted $2100 that it would be more then enough. That's if you want the no lift shift, digital adjuster, ect... the full load deal.