Quote:
Originally Posted by fireman3361
Ok, how hard is this to put in on your own? Do you need to cut any wires? I am guessing I have to run a sensor to each wheel?
Do you know if there is a DIY for this?
Thanks for the help!
|
Its not hard at all, the trickiest spot is getting to the abs wires on the front tires (and even then if you pull the wheel liners its a cakewalk).
You do need to cut the signal wire going to each abs sensor and put a "chip" in between it to send a signal wire back to the main processing chip. You can buy a main harness to go in between your ecu and body harness so that you do not need to cut any other wires on the car (which I strongly recommend).
There will be no install DIY since to the best of my knowledge James and myself are the only ones with this actual system on our cars.