**UPDATE**
So last night I trimmed the underside of the CF fang cover. It ended up being about 1-1/2" that I had to cut off since the evo-r did not fit the fang profile perfectly. I also just buffed out the scratches that were made with the dry fitting I tried earlier, then covered all those areas with the 'frog tape' masking tape, which comes off very easily. That allowed me to dry fit the evo-r without scratching the paint. After three rounds of cutting, it finally slid on there. I think I'm just gonna completely cover the fang area with the frog tape before I mount the cover for good. This way it will come off clean if I ever want to remove it. I will post pics and stuff when I mount it, but the weather should be over 70 degrees for proper adhesive, so it may be a week or so.
|