I got news from Rhetrofitsource that their batch of new XBs that weren't yellowish when off were bad and they won't have them. So I ordered a smaller 60mm halo for the flasher and am going to try something else so they don't look yellow or just decide to live with it.
I also changed up the demon eyes. I thought the heat might get to the strip LEDs in the reflective shroud so I moved them in the projector housing just behind the lens
I cut the strip down to 3 LEDS and it turned out REALLY nice. No cutting or drilling. Just the 3m tape and a little epoxy to secure it. I wired it up and out of a vent in the housing.
I ended up putting some shrink wrap on the wires where they pull through the housing for extra protection later.