I have RPF1 18x9.5 +15 and 18x10.5 +15. But I have AP six piston BBK on front. My setup was so close that it didn't scrape the wheel put to put a piece of pine straw when turning the wheel it got caught up. Now Megan (another forum member) had the same setup but cleared ok. Where it got caught up was on the lower corner of the caliper look to have a slight over mold/ casting effect. I didn't want to grind it any but could of. I just got some 2.5mm spacers from Z1. This way I wouldn't have to worry about small rocks on the track getting caught between the caliper and the wheel.
|