Nissan 370Z Forum - View Single Post

Catchin-Z's · 11-26-2013, 11:02 AM

Hello there,

I like all the DIY tips and tricks, quite nice to see budget conscience mods do work and turn out just fine.

I was hoping you could provide a couple details as I am considering purchasing some wheel spacers. I posted up a couple questions on the 18" stock thread but no answer as of yet. As yours are stock 18" and 20 mm's... some questions for you if you do not mind...

I contacted CPZ performance and could not provide a definitive answer, unless I pull the front stock rim and provide an picture to them.

I noticed in your build images a picture of the front wheel and saw a "smaller" nut sticking out (not the studs for the attachment of the rim).

Did you have to remove that when installing the 20 mm spacer. Also which brand did you end up purchasing. Seems like the H&R Trak DRM (bolt on's) on the Stillen website state they do not fit the 370Z fronts. Hence the question out to you.

Also how did you black out the door handles, was that plasti dip?

Regarding your purchase of the rear wing via WingTech, how was your experience dealing with them. How was the fit, finish and color match? I tried calling them several times now, left messages and send them 2 e-mails and have yet to receive any comm's back, hence my hesitation.

Did you go through their website or via their ebay listings?

Thanks in advance on any info you can share.

11-26-2013, 11:02 AM	#54 (permalink)
Catchin-Z's Base Member Join Date: Oct 2013 Location: Parker, Colorado, USA Posts: 75 Drives: 2013 370Z Magma Red Rep Power: 12	Hello there, I like all the DIY tips and tricks, quite nice to see budget conscience mods do work and turn out just fine. I was hoping you could provide a couple details as I am considering purchasing some wheel spacers. I posted up a couple questions on the 18" stock thread but no answer as of yet. As yours are stock 18" and 20 mm's... some questions for you if you do not mind... I contacted CPZ performance and could not provide a definitive answer, unless I pull the front stock rim and provide an picture to them. I noticed in your build images a picture of the front wheel and saw a "smaller" nut sticking out (not the studs for the attachment of the rim). Did you have to remove that when installing the 20 mm spacer. Also which brand did you end up purchasing. Seems like the H&R Trak DRM (bolt on's) on the Stillen website state they do not fit the 370Z fronts. Hence the question out to you. Also how did you black out the door handles, was that plasti dip? Regarding your purchase of the rear wing via WingTech, how was your experience dealing with them. How was the fit, finish and color match? I tried calling them several times now, left messages and send them 2 e-mails and have yet to receive any comm's back, hence my hesitation. Did you go through their website or via their ebay listings? Thanks in advance on any info you can share.