View Single Post
Old 10-29-2009, 12:24 PM   #67 (permalink)
SVTRacer
Base Member
 
Join Date: Mar 2009
Location: Baytown, Tx
Posts: 25
Drives: 09 Platinum Graphite
Rep Power: 16
SVTRacer is on a distinguished road
Default

Quote:
Originally Posted by Cjanik View Post
My car came with the stock wiring harness for the foglight. I have a sports touring model in case it matters.

However, the other end of the wires from the plug I found, is connected to nothing since My car didnt come with the "Fog light switch".

What I did was: plugged in the harness into the fog light. Then took the trunk panels (inside) off so that I could see the frame, which exposed a couple wiring harnesses. The light orange wire is the one that went to the fog light plug, and the green wire (i think, im not remembering very well) went to turn on the taillights when the brake is presssed. So I spliced those wires together, and that was it.

Now my fog light turns on everytime i hit the brakes.
Thanks for the tip. I did this as well. Nice and easy, and you only have to remove the rear trunk panel.


Quote:
Originally Posted by Pointman View Post
Uggggg that could be a problem. I was hoping it was the dead switch between the seat warmer switches.
I was thinking about using this spot for a switch, too. Was this used for another switch included with some other options? Why is it there?
SVTRacer is offline   Reply With Quote