Quote:
Originally Posted by wstar
Syno do you have a picture of how the underside of yours worked out? Did you pick that spot for alignment with some of the stock bracing on the underside?
|
Yes I did. I wanted to cut though only 1 layer and not through the bracing. I ended up cutting a little though because I needed an inch of back cut to have room to glue the mesh to the hood. The front bracing also bends down and away from the hood and that natural bend line was easy to follow.
Yes it looks like crap! I used dikes and I cut and pulled and tore the metal off because I didn't want to make more of a mess with metal shavings from grinding and I don't own cutting shears. But I don't care, no one sees under there.
As seen that's also as far forward as you can go anyways (right where the bracing bends down). Any further and you're over the radiator shroud that has no point to vent.
