Nissan 370Z Forum - View Single Post - alue for low pressure forced induction system???

Zensation · 11-10-2013, 05:32 PM

Hey guys open to some opinion here. Let me first say im not selling anything before i get in trouble by some moderator somewhere...

What would you consider paying for an easy install low pressure forced induction system that took maybe 2 hours for the average installer (DIY'er) no lubrication lines or anything just basically an intricate intake system. Say it could pressurize the manifold by a constant 3psi with a 98% flat boost curve across the entire RPM range (perhaps the biggest advantage of the system) and was dyno proven to gain 30 - 50 hp (on a 370z) even down low RPMS.????

Background: I myself (mechanical engineer) have been working with an electrical engineer and an automotive tech instructor developing such a system and we are super close to achieving this. We have everything documented and I'm considering blogging as we finish the first prototype.

I could see paying $750 or so... seeing as some people pay ~$500 for a stillen kit that does next to nothing down low.

11-10-2013, 05:32 PM	#1 (permalink)
Zensation Enthusiast Member Join Date: Jun 2012 Location: Spartanburg, Sc Age: 35 Posts: 483 Drives: 93 rx7 Rep Power: 13	alue for low pressure forced induction system??? Hey guys open to some opinion here. Let me first say im not selling anything before i get in trouble by some moderator somewhere... What would you consider paying for an easy install low pressure forced induction system that took maybe 2 hours for the average installer (DIY'er) no lubrication lines or anything just basically an intricate intake system. Say it could pressurize the manifold by a constant 3psi with a 98% flat boost curve across the entire RPM range (perhaps the biggest advantage of the system) and was dyno proven to gain 30 - 50 hp (on a 370z) even down low RPMS.???? Background: I myself (mechanical engineer) have been working with an electrical engineer and an automotive tech instructor developing such a system and we are super close to achieving this. We have everything documented and I'm considering blogging as we finish the first prototype. I could see paying $750 or so... seeing as some people pay ~$500 for a stillen kit that does next to nothing down low. __________________ 370z NISMO 0675 327 rwhp 280 rwtq - sold. FD RX7 single turbo 508hp - sold. Lexus IS-F 5.0L V8