Nissan 370Z Forum - View Single Post

Read T · 11-09-2013, 01:27 PM

Josh, I already have z1 50mm extended studs. The open ended nuts that I have (also Z1).

Can anyone confirm that if I put 50mm extended studs that the OEM wheels will still fit without a spacer?

Also, the Z1 open ended 'tuner' lugnuts I have are somewhat loose on the studs - it is kind of creeping me out. Even when run all the way down on the stud by and I can still wiggle the lugs around a decent bit.

11-09-2013, 01:27 PM	#4 (permalink)
Read T A True Z Fanatic Join Date: May 2012 Location: Raleigh, NC Posts: 1,046 Drives: 11 Nissan 370z BC 6M Rep Power: 18	Josh, I already have z1 50mm extended studs. The open ended nuts that I have (also Z1). Can anyone confirm that if I put 50mm extended studs that the OEM wheels will still fit without a spacer? Also, the Z1 open ended 'tuner' lugnuts I have are somewhat loose on the studs - it is kind of creeping me out. Even when run all the way down on the stud by and I can still wiggle the lugs around a decent bit. __________________ 2011 Nissan 370z Black Cherry Sport Pkg - Daily Driver, , 1960 Morgan +4 fun car, 1986 BMW 325ES, 1998 M3 and 1996 Spec Miata - Race Cars SUPPORT TEAM WINSOME RACING - WRL, CHUMP, LEMONS Last edited by Read T; 11-09-2013 at 01:32 PM.