View Single Post
Old 11-05-2013, 02:21 PM   #1 (permalink)
Marti
A True Z Fanatic
 
Marti's Avatar
 
Join Date: Feb 2012
Location: Central Florida
Posts: 2,090
Drives: TT SC300
Rep Power: 17
Marti is a jewel in the roughMarti is a jewel in the roughMarti is a jewel in the rough
Send a message via AIM to Marti
Default Feed That Thirsty Engine The Fuel It Needs! Rev Works FIC Injector Sale




We're more than glad to offer the 350Z / 370Z community a great deal on Fuel Injector Clinic's injectors for your high horsepower VQ.
[CENTER]





This package comes as a set of six (6) Saturated / High Impedance Ball & Seat Injectors with O-rings that fit the VQ engine perfectly. These injectors utilize the latest technology and provide great linearity and short pulse width repeatability.
Includes solder-in pigtails PGT USC6 or add Plug & Play adaptors PADPUtoD6

Fuel Injector Clinic injector sets are precisely flow matched to within 1%. Each injector within each set is individually numbered and results for each injector are listed on a detailed flow sheet included with the set.

Fuel Injector Clinic injectors are flow tested and rated at 43.5psi (3Bar) at 90ºF fuel temperature using CF-16B calibration fluid.


These injectors come in 365cc, 445cc, 525cc, 650cc, 775cc, 900cc, and 1100cc flow rates.

These feature an advanced spray pattern, as a result of ASNU’s proprietary diffuser plate, for precisely controlled atomization. This more uniform dispersion of fuel droplets means a better fuel/air mixture that burns more completely for improved cold starts, idle and fuel consumption.
This specific injector comes in a flow rate of 1050cc




And last but not least the Big Kahuna of their injectors: The 2150cc BlueMax Injector Set
This massive injector is in a class of its own when low end throttle response and short pulse width control is required. State of the art Data Match Technology dynamic flow matching is used during the production of these injector sets due their large flow rate. This significantly improves the ECU’s ability to control these injectors in the sub 2ms pulse width area, typical of idle and part throttle conditions.
Each injector is individually serial numbered and the results are provided on the Data Match Sheet providing the most complete flow matching and latency value information available in the industry today.



Injectors come with your choice of solder-in pigtails at no charge or plug-and-play adapters for a small fee. Prices for injector sets start at a little under $400

Send us a PM today and let us help you ensure your supplying enough fuel to your force induced engine!
__________________
Marti - Rev Works, Inc
https://www.facebook.com/Revworks
www.revworksinc.com / marti@revworksinc.com / aim: aimformarti
407-542-7863

Last edited by Marti; 11-05-2013 at 03:21 PM.
Marti is offline