Nissan 370Z Forum - View Single Post

Mike · 10-26-2009, 12:34 PM

I have Nismo Rays wheels from the accessory catalog, but they are stock spec. With the longer studs, I can't run my street wheels without spacers on front, but my track wheels (350Z Rays) use open lug nuts, and with the spacers I get vibration, without I don't. I think if the spacer ring went just 2-3 mm deeper into the wheel hub, they would be perfect.

I think by 2 piece, he meant that the hubcentric ring is a different piece than the actual spacer.

I have no problems with my 25mm rear spacers, but when I ran 20mm ones, the original wheel studs protruded past the spacer and the wheels wouldn't go on because they don't have relief holes on the back side in the proper location to clear the protruding studs.

10-26-2009, 12:34 PM	#9 (permalink)
Mike The370Z.com Sponsor Join Date: Jun 2009 Location: Loganville, GA Posts: 5,944 Drives: 370z Rep Power: 2186	I have Nismo Rays wheels from the accessory catalog, but they are stock spec. With the longer studs, I can't run my street wheels without spacers on front, but my track wheels (350Z Rays) use open lug nuts, and with the spacers I get vibration, without I don't. I think if the spacer ring went just 2-3 mm deeper into the wheel hub, they would be perfect. I think by 2 piece, he meant that the hubcentric ring is a different piece than the actual spacer. I have no problems with my 25mm rear spacers, but when I ran 20mm ones, the original wheel studs protruded past the spacer and the wheels wouldn't go on because they don't have relief holes on the back side in the proper location to clear the protruding studs. __________________ NISSAN: 75 280Z / 86 300ZX GLL /87 Sentra SE / 03 350Z / 23 Z Porsche: 93 968 / 23 Macan GTS / 93 968 Last edited by Mike; 10-26-2009 at 12:36 PM.