Thread: Spacer options
View Single Post
Old 10-26-2009, 09:33 AM   #8 (permalink)
Z1Performance
Base Member
 
Join Date: Aug 2009
Location: St. James, NY
Posts: 237
Drives: 350Z
Rep Power: 16
Z1Performance is on a distinguished road
Default

Quote:
Originally Posted by Mike View Post
if you don't get the bolt on type, you need longer studs also. I have found that with the ichibas in 15mm, my front balance is way off. The centering rings don't seem to protrude enough into the wheel to actually center it perfectly, and neither does our lugnut design help.

I've got the same ones on my car (front and back), and zero balance issues (work wheels). You're them with stock wheels?

The Ichiba ones are 1 piece, not 2 piece (not sure where that came from) and are hubcentric as well

This is the Ichiba Type 1 (comes in 5, 10, 15 and 20mm). Longer studs are included on the 10-20mm. I run these on my own car (actually on 2 of our Z's here). They are 1 piece, CNC'd aluminum/magnesium alloy - just like all the other spacers out there are. These come with longer studs, so you're old ones come out, and the new, longer studs go in.



This is the Ichiba Type 2 - they bolt on to the factory hub. Again, 1 piece CNC'd aluminum/magnesium alloy. Comes in 15, 20 and 25mm sizes.


Last edited by Z1Performance; 10-26-2009 at 09:39 AM.
Z1Performance is offline   Reply With Quote