View Single Post
Old 10-02-2013, 12:28 PM   #1 (permalink)
BeachZTT
Track Member
 
BeachZTT's Avatar
 
Join Date: Jul 2009
Location: Colorado
Posts: 746
Drives: '10 BC ZR T/S/Nav
Rep Power: 17
BeachZTT is a jewel in the roughBeachZTT is a jewel in the roughBeachZTT is a jewel in the roughBeachZTT is a jewel in the rough
Default Video Request...

Would someone mind taking a phone video of their top retracting, specifically in the area where the wire bundle rides the top frame on the drivers side?

My wiring bundle was replaced under warranty because it had a sensor wire fail and was indicating that top was not all the way open or closed. The bundle rubs the front corner of the top when the canopy closes. The car is currently at the dealer and they are looking at it. I just want to know what it is supposted to do/look like before I go to pick it up. I know what it is doing now is not correct as it is starting to abrade the very corner of the canvas. As the top is retracted, the bundle coils toward the middle of the car and then rubs the canvas as the canopy starts the close cycle. Sometimes there is enough contact to shift the path of the canopy and make a popping sound.

I wish I had taken a vid before I dropped it off so I could better explain what I mean.

Any help or insight woud be greatly appreciated.
__________________
'10 ZR Black Cherry Sport/Touring/Nav, Swift Springs, Stillen G3s, 15mm-F 20mm-R Spacers, SPC, Spoiler Solutions Rear Wing, Stubby Antenna
BeachZTT is offline   Reply With Quote