Quote:
Originally Posted by SouthArk370Z
Let me make sure I have you current setup right. You have a relocation plate on the engine (where the oil filter used to go) with two lines. One line is connected to the remote filter plate and the other line goes to the outlet of the cooler. At the remote plate, there's the line from the reloc and the other line goes to the cooler inlet.
Oil comes out of engine, into reloc plate, then on to the filter. From there the oil goes through the cooler and back to the reloc late. Did I get that right?
|
That sir is correct. I dont have room to stack both the thermo plate and the reloc plate on the engine, my intercooler piping runs right up against that reloc plate as it is. So the only way this can work is if I can stack it on the remote plate.
Thanks for your help!