Quote:
Originally Posted by Alstann
I confirmed with Mike that the 3" in down pipes will end in the stock location, but it will not mate up to anything that's less than 3 inch duals. The flanges are larger than the regular 2.5" in exhausts most peeps run.
That's not a crazy thing to fix though, I plan on either running cutouts or getting a shop to mate my HKS to the downpipes.
|
This is my boat also. I have the Greddy TI-C which is 2.75 (70mm) but to me looks to taper to a 2.5 where it would bolt up. I'll measure tomorrow. So while doing this I'm going to have the resonators taken out for a true straight pipe.