They are easy to make brah. I made one for my ex's TC's. Used a piece that was 2'x6'x1/8" T4 6061 aircraft aluminum. Traced it out, cut with some WD40 and jigsaw, then clamp to a table and smooth and shape with a belt sander with 60grit. Sent it off to get powdercoated and some pinstripping. Don't use any other alloy combo other than 6061, has the best anti-corrosive properties. Was made to keep the front lip from getting scrapped up all the time going in and out of driveways/parking lots and speedbumps. Make sure you are able to access the factory undertray so you still do routine maintenance. I riveted it to the lip in 20 spots, due t rivets staying extremely flush to the surface.
