Quote:
Originally Posted by batman_4
+1.
for some odd reason i blanked out and bought these specific LED boards from the z store. they are pretty damn bright and emit a clean light. only downside to them would be the double sided tape that is included sucks though so i'm going to go look for some new stronger one that can keep the boards stuck in the housing.
|
Back in my 12V days I used 2 kinds of double sided tape. I have no idea where to buy them for sure or part numbers but this is what I know.
1) grey tape, red backing. usually comes in a roll (like a spool) and is about 1/2-3/4" wide. this stuff is pretty thin and holds well if everything has been wiped down with alchohol.
2) white foamy tape. i've seen this stuff in square grid sheets and just strips. its probably 1/4" thick but it sticks to anything.
I would typically use the grey tape to hold stuff that didn't move or have to much force trying to pull against it. The white stuff I used all the time for amp gain controllers, rf cd changer displays, etc etc. I wouldn't recommend it for anything that got too hot though, looks like it would melt.