As a few already knows, about what my intent was with my custom exhaust. Its to have a single exit and I mentioned that I would have to make a bracket that would be similar to the 350z .
After some thought, I made something else that would do the same and less work. This will still allow me to have enough clearance for the straight thru muffler !
this is the final product, the baby blue is only what I could find a while ago ;(
Edit; the two outer nuts are only a spacer welded to the square tubing since I didn't had a shorter bolts there is the same threaded hole into the frame where the 350z bracket would go. then the 2 center one has an actual bolt welded with a slightly bigger nut also welded to act as a spacer.
Once installed, does anybody can see what happen ? hehe
Custom Sub-frame bracket had to be made for the future exhaust !
You see the idea behind this ?