Shop: Motion Lab Tuning
Dyno Type: Dynocom FX5000-AWD
Boost: 8psi
Fuel: 93OCT
Target AFR: 11.2:1
SAE Corrections: Default Corrections
Peak HP at RPM: 496whp @ 6750 RPMs
Peak Torque at RPM: 436wtq @ 5650 RPMs
Transmission: Stock 6speed
Gear: 5th
Engine Management: UpRev Osiris tuning suite
Engine/Power Modifications:
- PTE6266 Top mount turbo kit
- DW 850cc injectors
- 255LPH fuel pump
- GReddy TI-C Exhaust
- Turbosmart BOV
- Turbosmart EWG
- Manual boost controller
- SETRAB oil cooler
These are the final results from the 6266 equipped 370z we completed at the end of last week. The car was absolutely screaming on the dyno, there is a video posted below, and you could tell it was happily making power. We were tuning around 8PSI on the dyno to see how far it would take us. We started out with a baseline dyno first as the car had been tuned with the installation of the turbo kit in Florida. It was making 500+RWHP at 10PSI on their DYNOMite dyno. Our baseline was at 460WHP and that's where Todd started his work. The first pull on the Motion Lab map jumped up to 479WHP, but was running a bit rich. By the time we got the AFR smoothed out we had picked up some more power. After fine tuning of the ignition timing map and VVEL we ended up with our final peak power of 496RWHP and a very broad powerband. Gains of 36WHP and 40WTQ at the same boost level isn't too shabby! Always love tuning these boosted Z's, they really come alive with the turbo/supercharger set-ups.
This particular car was previously supercharged. He has been absolutely loving the power delivery from the turbo set-up versus the supercharger. This thing comes on quick, hits hard, and pulls clean in the top end!
Highest run HP/TQ with Boost + AFR Graph:
Heres a video from our facebook page:
Thanks for looking!
Alex Goodwin
AlexG@motionlabtuning.com
MotionLabTuning.com - Engineering Performance