Nissan 370Z Forum - View Single Post

Orestp · 09-02-2013, 08:30 PM

I have the Kiwi2 WiFi + iMFD.

I have 2 PLX sensors daisy chained / connected to the iMFD.

I've checked the power to each sensor with a multimeter - they're each getting a little over 12 volts.

I've tried swapping the serial cable connecting the first sensor to the iMFD - used a cable that I use to connect my iPod to my car stereo aux input and that I know is not faulty.

If I connect only to the Kiwi2 Wifi - it makes the connection to the car's OBDII right away.

But neither Rev or DashCommand work so that you can see the PLX sensors via the iMFD.

Both Rev and DashCommand advertise that you can see PLX sensors in their apps if you use iMFD.

09-02-2013, 08:30 PM	#21 (permalink)
Orestp Base Member Join Date: Jul 2011 Location: Edmonton, Alberta Posts: 43 Drives: 2010 370Z Rep Power: 14	Kiwi2 + iMFD with PLX sensors does not work with Rev or DashCommand I have the Kiwi2 WiFi + iMFD. I have 2 PLX sensors daisy chained / connected to the iMFD. I've checked the power to each sensor with a multimeter - they're each getting a little over 12 volts. I've tried swapping the serial cable connecting the first sensor to the iMFD - used a cable that I use to connect my iPod to my car stereo aux input and that I know is not faulty. If I connect only to the Kiwi2 Wifi - it makes the connection to the car's OBDII right away. But neither Rev or DashCommand work so that you can see the PLX sensors via the iMFD. Both Rev and DashCommand advertise that you can see PLX sensors in their apps if you use iMFD.