Well I'm inpatient so I decided to see what would change by installing the toe bolts. To my surprise the numbers didn't do what I was thinking they'd do.
Before install...
Driver camber -1.9
Passenger cam -1.4
Rear toe 0.094"
After install
Driver camber -1.8
Passenger cam -1.3
Rear toe 0.094"
Basically nothing happened which is awesome! Because 1. I don't need to take them off and 2. Everything's in spec.
Now I was scared because first I just installed the passenger side and measured and the toe was at 0.25" which is out of spec. I thought "o great, after the drivers side ill be 0.5" or something. But doing the drives pulled it right back where it was. Now I did look at the factory marks and it looked like the eccentric bolts were straight up and down so they weren't giving any adjustment anyhow. Later ill tackle the camber bolts.
