Nissan 370Z Forum - View Single Post - 20x9 +0 front wheels and H&R springs, anyone? Help please

BrandonSS · 08-16-2013, 10:32 AM

I think it will be close with a 15mm spacer instead of my 20mm spacer. The wheels specs are 20x9 +15. So with my 20mm on there it is a -5. There isnt enough clearance to run a 10mm or else I'm positive it would work. The rear is no problem at all.

The wheel is slightly turned to the right. I should have straightened it up but you get the idea. It's also not quite all the way down since I couldnt roll it out being there is no tire.

Again wheel is turned outward just a hair to it appears to poke more than it would.

I planned to run a 245/30/20 up front and a 285/30/20 out back. Slightly off from stock size.

08-16-2013, 10:32 AM	#4 (permalink)
BrandonSS Track Member Join Date: Apr 2013 Location: Indianapolis Age: 42 Posts: 644 Drives: 2009 370z T/S/techM6 Rep Power: 13	I think it will be close with a 15mm spacer instead of my 20mm spacer. The wheels specs are 20x9 +15. So with my 20mm on there it is a -5. There isnt enough clearance to run a 10mm or else I'm positive it would work. The rear is no problem at all. The wheel is slightly turned to the right. I should have straightened it up but you get the idea. It's also not quite all the way down since I couldnt roll it out being there is no tire. Again wheel is turned outward just a hair to it appears to poke more than it would. I planned to run a 245/30/20 up front and a 285/30/20 out back. Slightly off from stock size.