Nissan 370Z Forum - View Single Post

Trips · 08-09-2013, 10:26 PM

I used a 1/2'' Ratchet with a 14mm socket to remove the engine bar.

But you're right they are on there pretty tight.

I would suggest a small piece metal pipe to slide over the ratchet to convert into a breaker bar.

08-09-2013, 10:26 PM	#3 (permalink)
Trips Administrator Join Date: May 2009 Location: Disneyland, Ca Posts: 8,732 Drives: 🔰 Rep Power: 10	I used a 1/2'' Ratchet with a 14mm socket to remove the engine bar. But you're right they are on there pretty tight. I would suggest a small piece metal pipe to slide over the ratchet to convert into a breaker bar. __________________