Megan370z

well, its when I see other old & new platform and their tuning software are relatively better than what we got so far for the 370z ...

now Im running the HR ECU which has tuning capability for the Cam.

right now im having a trust issue with Uprev because;

Im having a big trust issue with Uprev right now,
Since I swaped the HR heads into my 370z, I couldn't datalog with Cipher until I tried again today.
I never had problem with the Rom Editor for logging..


so doing a test map I make sure the IDLE area is at 0deg on both Intake & Exhaust Table.

I get this with the Rom Editor;
Intake Bank 1 = 0
Intake Bank 2 = 0
Exhaust Bank 1 = 0
Exhaust Bank 2 = 130

If I add 10deg on both ,, the result is like this
Intake Bank 1 = 10
Intake Bank 2 = 10
Exhaust Bank 1 = 10
Exhaust Bank 2 = 148 (+18 !!)

Then under Cipher datalogging I get this with 0deg in IDLE area Int. & Exh
Intake Bank 1 = 0
Intake Bank 2 = 0
Exhaust Bank 1 = 130
Exhaust Bank 2 = 130

if I add 10deg I get this
Intake Bank 1 = 0
Intake Bank 2 = 0
Exhaust Bank 1 = 112
Exhaust Bank 2 = 111


so I cant trust anything in this.
My Favor is to see what other HR owner gets please .....


edit; the engine idle fine, no DTC, doing a 1/4 mile performance run with my AiM Solo DL , I got 103.5mph which look to be alright for a lightly modded HR engine.
So which one can I trust Cipher or Rom Editor.
BUt I couldn't datalog with Cipher until today, I guess they fixed something recently ?

edit;
There was a time when Uprev wanted to ditch Cipher and rely on the ROM Editor for datalog and tuning...
So im not too sure why there is a different between both datalog program... and this add a doubt in my mind... in why would one say XXX and the other one say ZZZZ

__________________
Megan Journal *Click Me* ....................One Man Team Motorsport *Click Me*