You guys are taking this all wrong or maybe I'm not explaining myself correctly... I'm not trying to do the cheap way out at all.. I have bought Akebono calipers, stoptech drilled and slotted rotors, motul rfb600, EBC Yellow Brake Pads, and now I'm trying to figure out what options I have with the brake lines. I'm thinking about doing the install myself and I want to make sure I have everything before I do the install.
I'm familiar with SS lines. They require a lot of maintenance and periodic inspection. At a minimum you should check them 1-2 times per year for frays and leaks (especially at the connections). If you go to a track and ask people about SS lines they will tell you that most brake failures at the track are caused with cars with SS lines. Whether it's installation error or poor quality parts. You barely hear of brakes failing on OEM lines. Top of the line sport cars don't have SS lines.. Although internally they are probably slightly different... Also there is a big difference between “DOT compliant” and “DOT approved”. A lot of these small companies who make and sell brake lines are all inferior lines which "look" good. The only SS lines I'll drive on are the coated Goodridge Phantoms lines. Although I hear that Goodridge non-coated and Stoptech lines are good too.
I will be tracking my car maybe a few times a year and the marginal 1%-2% benefits of SS lines aren't worth it for me. Google it and read about if SS lines are worth putting on daily drivers...
I just want a clean install and I assumed the best way was not to touch the lines except to where it meets the calipers. Causing a smaller chance of possible leaks. I know the "banjo" bolts are different but not sure exactly what I need in regards of lines, bolts, washers, etc.. I think I need to purchase the lines ($40) posted in the thread I posted but I'm not 100%...
By no means am I trying to seek the "cheap/unsafe" way out... My car is FBO with no "cheap" parts.. Sorry if I confused any of you.. lol
|