good luck if you are just removing the ABS fuse.
The brake system will become 50/50 which give way too much rear bias,
you think that will help you in drifting ? I doubt it very much, because you normaly use the handbrake to initiate the drift (one of the method) using the brake pedal will also upset the front end. but go ahead do it hehe...
so if you do remove the ABS , I strongly suggest you to install a proportional valve.
then if you go even farther by removing the actual ABS module, let me know how it goes ! your speedometer will not work unless you figure out which wires to hard-wire.
|