So after a call to Magnaflow the problem is resolved. The issue was that the shop had all the exhaust joints drawn up tight which decreased the rear clearance significantly. I put it up on the jack stands in the driveway, loosened the right and left joint going into the muffler and moved it back just short of an inch. Still significant capture at the joint and plenty of clearance at the evap box.
I think that the Magnaflow kit was great, great price on Amazon 837.00 and sounds good surprised that they are not used more in this forum.
Regards,
Jim
Quote:
Originally Posted by Jimc
Had the Magnaflow Exhaust installed by a muffle shop. They brought me back to see an issue where the passenger pipe at the bend for the tail piece is not able to clear the fuel filler inlet air box. The mechanic did the best he could to shift everything to allow it to clear before the pipes were clamped down, but as you can see from the Pic it is still in contact with the box.
Anyone else experience this condition?
Thanks for looking and hope someone has some thoughts.
Jim
Attachment 72383 |