View Single Post
Old 07-19-2013, 12:47 AM   #8 (permalink)
FringeXVO
Base Member
 
FringeXVO's Avatar
 
Join Date: Aug 2011
Location: Austin
Posts: 142
Drives: 2JZJeep
Rep Power: 14
FringeXVO is a jewel in the roughFringeXVO is a jewel in the roughFringeXVO is a jewel in the roughFringeXVO is a jewel in the rough
Default

I started off by having these media blasted by Chris of Enigma Motorsports, then used a stainless polishing kit from Eastwood and followed the 3 step process. I then cleaned them, put them on a lathe, and have started building the oxide layers...and that means fire.

I'm gonna do this in stages and see what I can do with different looks. I like the relatively high gloss base material and I think it shows promise. I'm gonna run the gamut with the temps and see what else I can come up with.

Polished:



I must say I feel it was difficult to get my phone to capture the gold well, but these pictures are close enough for now.






I went a little longer to darken the gold a bit.



__________________
http://i54.photobucket.com/albums/g9...uitySigpic.jpg We exist to do great things. FringeXVO-Mech Design Fab

Last edited by FringeXVO; 07-19-2013 at 01:11 AM.
FringeXVO is offline   Reply With Quote