Nissan 370Z Forum - View Single Post

sselemit · 07-07-2013, 09:59 PM

As you know, the new morimoto version xBALED has a small tab sticking out which is a b***h. The old version xBLED has the connection on the back of the ring. I guess the engineer guy just went full retard at some point during the process of designing the new ring

. Anyhow, here is my little modification:

I re-soldered the wires to make them sideway to reduce the clearance.

Next, I drilled a hole close as much as possible to the edge, but not quiet going over it to ensure enough clearance for the tab.

Then, i shaved quiet a bit off about a quarter of the ring.

Viola, PERFECT fitment, just like OEM. You have to look very closely to see the gap.

07-07-2013, 09:59 PM	#315 (permalink)
sselemit Base Member Join Date: Apr 2011 Location: VA Posts: 58 Drives: '10 Z34 Blue 7AT NAV Rep Power: 14	Fitment mod As you know, the new morimoto version xBALED has a small tab sticking out which is a b***h. The old version xBLED has the connection on the back of the ring. I guess the engineer guy just went full retard at some point during the process of designing the new ring . Anyhow, here is my little modification: I re-soldered the wires to make them sideway to reduce the clearance. Next, I drilled a hole close as much as possible to the edge, but not quiet going over it to ensure enough clearance for the tab. Then, i shaved quiet a bit off about a quarter of the ring. Viola, PERFECT fitment, just like OEM. You have to look very closely to see the gap.