Nissan 370Z Forum - View Single Post - DIY: How to Bleed Your Brake Fluid Using Motive Power Bleeder 0117 (AK370Z)

JARblue · 07-01-2013, 09:17 AM

I just did this the other week during front rotor and pad replacement. The only thing I'll add here that I didn't see is that the bleeder valves are supposed to be torqued to 70 ft-lbs in-lbs.

Also, I borrowed a friend's power bleeder and the hose attached to the main reservoir busted on me when I was just about to start the last corner. It sprayed me in the face (that's what she said) and got on my fender paint as well - I had to scramble to get a towel and some cleaner to wipe it off quickly. Just a friendly reminder to check the condition of your equipment

07-01-2013, 09:17 AM	#14 (permalink)
JARblue A True Z Fanatic Join Date: Mar 2011 Location: Austin, TX Age: 43 Posts: 36,450 Drives: 11 Z34, 98 E36 M3 Rep Power: 2684440	I just did this the other week during front rotor and pad replacement. The only thing I'll add here that I didn't see is that the bleeder valves are supposed to be torqued to 70 ft-lbs in-lbs. Also, I borrowed a friend's power bleeder and the hose attached to the main reservoir busted on me when I was just about to start the last corner. It sprayed me in the face (that's what she said) and got on my fender paint as well - I had to scramble to get a towel and some cleaner to wipe it off quickly. Just a friendly reminder to check the condition of your equipment __________________ 2011 370Z 6MT Sport Gun Metallic \| ARC \| CJM \| Ecutek \| FI \| Fujimura \| R2C \| SPL \| Stillen \| TWM \| Z1 \| ZSpeed \| Last edited by JARblue; 07-02-2013 at 10:13 PM.