Quote:
Originally Posted by MightyBobo
Read above.
All said and done, the brake pads will be around $300 (these are track ONLY brake pads, btw - if you want street pads, look for their street compound). Rotors will probably be around 500-600 give or take. Fluid, another 20-30 at least.
|
Forgive me, but that is poor advice. If you are going to track your car, especially in a climate as extreme as the Middle East, the LAST place you want to skimp on is your brakes.
Motul RBF 600 is good stuff, but if you want extreme heat protection, Castrol SRF is what you want. There's a reason it costs $80 a bottle versus $15 for Motul.
Stainless lines not needed? I've seen OEM rubber lines literally melt right off a caliper after a day of hot lapping. And for the mild investment needed (around $150 a set) it just makes sense to upgrade them.
2-piece rotors are a waste of money? The reason you want to go with a 2-piece rotor is to SAVE money in the long run. Stock rotors don't handle the stress/heat of track days very well and you will start going through them (cracking them) on a regular basis. The 2-piece configuration saves weight, is better at dissipating heat than a 1-piece rotor, and allows you to replace just the friction ring versus having to buy a whole rotor assembly every time they wear out. They're not that expensive. I've seen a front set of 2-piece rotors for $650. The replacement friction rings (the only parts you will need to replace after purchasing the initial set) will be much less expensive. Also, you won't need 2-piece rotors for the rear. The fronts are what do the majority of the braking and consequently take the majority of the abuse.
Whatever cooling kit you go with, make sure the duct mounts directly to the spindle so that the cooling air goes to the center of the rotor and forces air to travel through the middle of the disc (from the center, outwards).
Pads are a personal choice. You will likely go through a few different sets of pads before finding your ideal combination.