Nissan 370Z Forum - View Single Post

DPE G · 06-21-2013, 09:12 PM

****I believe the intake piping is different for the Z, so buyer be aware that it will require some modification.

Asking $6500

EDIT

Ok so as you may have seen this kit was originally listed as a stage 1 and I was upgrading to a stage 2. After removing my original turbos I noticed them being the same size. I have called and confirmed with Sam@GTM that the turbos I had were already the stage 2 components. So this kit is now being re-listed as a stage 2. My loss is your gain, this is a great deal on a great kit with a lot of new pieces. I will lay the entire kit out if it does not sell before I have time to do so. But here are some pictures to show that both kits contained the .86 a/r stage two turbos, good for up to 700hp according to GTM.

If anyone is interested in it, I can have the pipes powdercoated whatever color you want for $150 and the BOVs for an aditional $75.

Retail on this kit is $8495, save yourself $2000 for a kit that is barley used.

Below is a description of all the components of the kit :
Cast Ductile Iron Exhaust Manifolds And Turbine Housing *NEW
Pre-Bent Stainless Steel Heat Shields *NEW
Exhaust Manifold Install Hardware Kit *NEW
4-Ply High Resistance Nomex Silicon couplers
Stainless Steel T-Bolt clamps
3.5 x 13 x 24 Bar and Plate Core Intercooler Rated 1000hp
GTM Steering Coupler *NEW
Polished Stainless Steel and Tig Welded Piping **Custom Powdercoat Available
Pre-made steel braided oil and coolant Supply & Return lines
Garrett's Twin ball bearing water & oil cooled turbocharger
Cold Air Intake System (using k&n filters)
TiAL 50mm Blow-off Valve
HKS Internal Wastegate Actuators
All Necessary Hardware and Installation Instructions
GTM Custom mapped plug-in And play engine management for optimum engine tune and power .
GTM Basic fuel system with Denso 600cc Injectors and Walbro 255 Fuel Pump

BRAND NEW HKS EVC-S EBC for $350 more!

As we all know GTM has a great deal on the MHI kit right now, however they are inferior journal turbos, not the Garrett dual Ball Bearing turbos.

Hard to get pictures of it but everything you need to bolt and go will be included. And the GTM instruction manual as well.

06-21-2013, 09:12 PM	#1 (permalink)
DPE G Track Member Join Date: Apr 2012 Location: Pensacola FL Posts: 747 Drives: 2015 PW Nismo Tech Rep Power: 303	GTM Stage 2 Turn Key TT Kit ***I believe the intake piping is different for the Z, so buyer be aware that it will require some modification. Asking $6500 EDIT Ok so as you may have seen this kit was originally listed as a stage 1 and I was upgrading to a stage 2. After removing my original turbos I noticed them being the same size. I have called and confirmed with Sam@GTM that the turbos I had were already the stage 2 components. So this kit is now being re-listed as a stage 2. My loss is your gain, this is a great deal on a great kit with a lot of new pieces. I will lay the entire kit out if it does not sell before I have time to do so. But here are some pictures to show that both kits contained the .86 a/r stage two turbos, good for up to 700hp according to GTM. If anyone is interested in it, I can have the pipes powdercoated whatever color you want for $150 and the BOVs for an aditional $75. Retail on this kit is $8495, save yourself $2000 for a kit that is barley used. Below is a description of all the components of the kit : Cast Ductile Iron Exhaust Manifolds And Turbine Housing NEW Pre-Bent Stainless Steel Heat Shields NEW Exhaust Manifold Install Hardware Kit NEW 4-Ply High Resistance Nomex Silicon couplers Stainless Steel T-Bolt clamps 3.5 x 13 x 24 Bar and Plate Core Intercooler Rated 1000hp GTM Steering Coupler NEW Polished Stainless Steel and Tig Welded Piping Custom Powdercoat Available Pre-made steel braided oil and coolant Supply & Return lines Garrett's Twin ball bearing water & oil cooled turbocharger Cold Air Intake System (using k&n filters) TiAL 50mm Blow-off Valve HKS Internal Wastegate Actuators All Necessary Hardware and Installation Instructions GTM Custom mapped plug-in And play engine management for optimum engine tune and power . GTM Basic fuel system with Denso 600cc Injectors and Walbro 255 Fuel Pump BRAND NEW HKS EVC-S EBC for $350 more!* As we all know GTM has a great deal on the MHI kit right now, however they are inferior journal turbos, not the Garrett dual Ball Bearing turbos. Hard to get pictures of it but everything you need to bolt and go will be included. And the GTM instruction manual as well. __________________ \| 2015 Nismo \| DPE \| AirLift \| SPL \| StopTech \| Toyo \| Motordyne \| Tommy Kiara \| Amuse \| ARC \| Top Secret \| Stillen \| Hotchkiss \| Last edited by DPE G; 06-26-2013 at 10:10 PM.