Quote:
Originally Posted by scottIN
It was flat stock, but it was pretty stiff. I didn't want a leg protruding down to (a) catch a curb, or (b) have aero pressure on it. Even with a 24" long piece of 1 x 1 L-angle, you're getting like 24 sq. in. of aero resistance on it, which would be a lot of pressure. About like holding your hand out the window @ 65 mph.
It worked fine all summer, in 100+ degree temps, but fell off in the fall. Was hoping it would be ok without it. I didn't have any issues until it got to about 90 this summer.
|
There is enough of a lip on the front of the splitter that you could do a 1/2" hat stiffener and not hang below the front of the lip. I'm probably going to do this soon and will post results.
__________________
F.I. CF CBE | Avant Garde M310 | BC BR's | ONEighty | Status | EvoR | Stillen | Whiteline | B&M | Bespoke Details
Boosted Performance | Precision Turbo | Tial | HKS | Innovate Motorsports | Bosch | Treadstone | Walbro | UpRev | Depo