Yep! Another diy be me, canards?
Custom hood vents
Custom hood vent update thread.
Garage Line, eBay, OBX header, custom CBE, dyno results.
Rear essentric lockout bolt kit?
370z 50-100mph tread. Everyone post.
DIY: 2013 370z LED daytime running lights at night and day
2013 370z DLo's brake cooling duct mod installed
Diff cooler and inline filter
Building a complete under aero tray and diffuser :)
DIY cai?
2013 Z differences.
2013 Z RPF1 's
Top speed dual cbe
http://www.the370z.com/intake-exhaus...ml#post2713426
To date 1/14
Weighed stock, full tank 3361 lbs
1. GTR start button
2. GTR dome light covers
3. LED DTRL hooked up all the time; don't turn off with headlights turning on
4. Gutted trunk, engine covers, TB coolant hoses, baby seat bracket, drivers side fuse box thing, trunk sound deadening, about 60lbs so far
5. Magnetic oil drain plug
6. Oil changed at 20 miles after hard break in with dino oil
7. Pura long filter
8. Moved windshield washer bottle to trunk, 3/4 gallon Devils Own bottle
9. Installed my own AOS
10. Z1 SS premium brake lines
11. Rbf600 fluid, brakes and clutch
12. TopSpeed true dual CBE
13. Changed oil second time 1127 miles, Redline 5w-30 full synthetic
14. OEM chin spoiler relocated
Weighed in at 3280 full tank
1. RPF1's 18x9.5+45, 18x10.5+15
2. HTR z3 255/285
3. Z1 20mm front bolt on spacers
4. More sound deadening and panels removed
5. 11lbs Deka battery
6. Installed 18" resonators to delete cold start rasp
7. My own CAI like the Stillen
8. Whiteline front sway bar
9. Hood vent mod
10. Brake duct cooling lines
11. More gutting
12. Made my own rear camber and toe bolt lockout kit
13. Color matched brake duct cooling inlets
14. Blacked out lower lip
15. Z1 post MAF tubes
16. Redline mt-85 tranny fluid
17. Redline 75w90 diff fluid
New scale, 3101 lbs with 10 dots on the gauge. Fully fueled should be 3147 lbs
1. Long tube headers
2. Thermal wrapped long tubes and Y pipe
3. More gutting
4. New CBE, straight pipe axle back
5. Removed all sound deadening
6. Made custom switch board where center glove box used to be
New race form weight 3083 lbs! Still some to go.
1. Finished diff cooler gauge install
2. Yaw sensor kill switch
3. Started deleting wires that are unnecessary
Weight to be seen.
1. Finished diff cooler install
2. Swift spec-r front spring, swift 65mm/6" 10k rear spring
3. SPL diff bushings
4. SPL camber arms
5. SPL traction arms
6. SPL mid links
update 5/13/15,
313HP/266TQ 5th gear SAE
Engine----
LTH---------OBX, Done
CAI---------3" Mine, Done
AOS---------Mine, Done
PnP TB, upper and lower mani-------Mine, Done
Tune----------Covert, Done
Engine mounts---------Done
Oil cooler---------Mine, Done
PS cooler---------$
CBE coming out the side skirt-------Done
Drive----
Rear diff cooler--------Mine, Done
Clutch--------$
Flywheel--------$
SPL diff bushings--------Done
Drop Eng. tranny mount--------Done
Redline diff fluid---------Done
Redline tranny fluid--------Done
Clutch slave cylinder--------$
Suspension----
Stance 2 way coilovers------18k/8k, Done
SPL toe links------Done
SPL traction arms--------Done
SPL rear chamber arms-------Done
Hotckins front sway bar------Done
SPL front lower bushing-----$
SPL front impact bushing------$
SPL camber arms front-------Done
SPL rear knuckle bushings------Done
SPL front end links-------Done
Traction and yaw kill switch------Done
Brakes-----
Z1 SS brake lines------Done
Front brake cooling ducts------Done
Rear brake cooling ducts------Done
Rbf600 fluid-------Done
2 piece front rotors------Done
2 piece rear rotors-------Done
Xp12------Done
Xp10-------Done
Chassis
Roll cage--------Done
Aero
Front splitter-----Mine, Done
Canards------Mine, Done
GT wing------APR GT250, Done
Rear diffuser--------Done
Wheels/tires
RPF1's 18x10.5 +15/-5 (Z1 20mm spacer), 285/35/18------Done
Safety
FIA seat------Done
brackets-----Planted, Done
belt------Done
Hans------Done
Misc.
11lbs battery------Deka, Done
moved washer bottle-------Done
Fuel tank mod-------Done