View Single Post
Old 05-30-2013, 11:30 PM   #5 (permalink)
itsrisky
Base Member
 
Join Date: May 2013
Location: mississippi
Posts: 3
Drives: bmw
Rep Power: 12
itsrisky is on a distinguished road
Default

well from what I could find and piece together... is pin 6 and 10 are positive. and pin 8 is negative. only that my plug didn't have a wire in pin 8. so that is throwing me off. I do have a black wire at pin 3. I have checked with an ohm meter and I am getting 0 ohm from pin 2,3,8,9..... so im just guessing that pins 3 and 8 are interchangeable as a ground. also guessing that pin 4 and 8 control side view mirror dimming ( only a guess because I looked up in 2008 maxima factory service manual *wire colors were not the same as mine but pin locations was*). but I hate to guess and fry my mirror. I am not installing till next week so I am going to research a little more.
itsrisky is offline   Reply With Quote