Hey everybody,
Here is the long over due DIY for the CF B-pillars from SpawnAero. Enjoy the pictures and videos!
Step 1: Remove the OEM B-pillars try not to break the brackets on the back
Step 2: Put all the tabs into their places
Step 3: Apply strips of 3M double sided tape to the back of the clips (3 strips for the top clip and 4 strips for the bottom 2 clips)
Step 4: Align and place the CF B-Pillars ontop of the clips (press down onto the clips)
Step 5: Slowly remove the CF B-Pillar from the door to the back (make sure all the 3M tape stay on the CF B-Pillar)
Step 6: Remove the clips and place them on the CF B-Pillars
Step 7: Apply the Super glue around the base of the clips and cover the 3M all the way to the CF backing (make sure to have a good bead of glue on the CF backing)
Step 8: Let it dry for about 5-10 minutes
Step 9: Plug them in
Step 10: Your Done go Drink a Beer!
Vids:
YouTube - SpawnAero DIY B Pillars 1/4
YouTube - SpawnAero DIY B Pillars 2/4
YouTube - SpawnAero DIY B Pillars 3/4
YouTube - SpawnAero DIY B Pillars 4/4