how can it be your pads if pads aren't a moving piece of machinery? pads are stationary and are going to wear at any angle because it is a softer material than rotors, thus re-proving my point that your rotors are slightly warped. If I were you, buy a new set of oem rotors and pads and install them yourself. Follow the torqueing procedures and try it out that way. If you shaved the pad it won't be a even seat on the rotor causing the brake pad to get hot, once it gets hot it could deposit more material onto the rotor causing a hard/hot spot causing it to warp. I have heard of this happening before, which is why I always buy new pads with new or turned rotors.
|