Quote:
Originally Posted by Chuck33079
Can you elaborate a little?
|
As you can see the graph wasn't perfectly smooth like some of the others we have posted. It might be tolerable This was our highest peak power run, but it was also one of the first pulls of the day so there was much less heat soak. We continued to adjust the VVEL, fuel, and timing tables after this initial pull. I'm confident the car would make even more power on a cool run at this point. However by the time the tuning session was totally complete the heatsoak was robbing us of roughly 15-20hp peak power, but with the additional VVEL tuning we were making more power everywhere else on the graph.
Quote:
Originally Posted by elperuano
So this Stillen SC kit is no longer a Stillen but a vortech correct?
|
Yes this kit uses the V3-SCi trim blower. The 928Motorsport impeller does not fit this particular blower. Vortech however has a factory upgrade impeller that is larger than the one included in the out of the box stillen kit. This impeller seems to make good power increase over the 928Motorsport impeller, which we have also tuned, that puts out around 420-430whp.
Quote:
Originally Posted by Chuck33079
I thought it was always a Vortech blower.
|
It is and always will be a Vortech blower, there's just not much left that is Stillen about this particular kit outside of the intake manifold and their bracket
Thanks for the comments and questions guys!
Thanks,
Alex Goodwin
AlexG@motionlabtuning.com