you can use the banjo bolt setup on the akebono calipers. you might need a shorter banjo bolt though, or you can just cut it down. The flange where the hard pipe goes in is flat, and the copper washers will mate up just fine. If you need to cut the bolt down, get an M10x1.0 nut from the hardware store, thread it onto the banjo bolt to where you want to cut and then cut it with a hacksaw, then unthread the nut.
__________________
NISSAN: 75 280Z / 86 300ZX GLL /87 Sentra SE / 03 350Z / 23 Z
Porsche: 93 968 / 23 Macan GTS / 93 968
|