Nissan 370Z Forum - View Single Post - [Official] "Which intake should I buy for my Z?" thread.

Cmike2780 · 05-02-2013, 02:45 PM

If you're not comfortable with working on it yourself, have someone qualified to do it. It seems like you've never done this sort of thing before. It's really not that hard to install the gen 3's, but you can mess up something if you're not carefull. Something as simple as installing the maf sensor to the new tubes for example. I don't want to scare you, but you could end up paying a lot more than $175 if you mess up. Only you can decide if it's within your abilities. The bumper removal is probably the easiest part of the install.

05-02-2013, 02:45 PM	#246 (permalink)
Cmike2780 A True Z Fanatic Join Date: Jun 2010 Location: Long Island Posts: 5,059 Drives: slowwww Rep Power: 29	If you're not comfortable with working on it yourself, have someone qualified to do it. It seems like you've never done this sort of thing before. It's really not that hard to install the gen 3's, but you can mess up something if you're not carefull. Something as simple as installing the maf sensor to the new tubes for example. I don't want to scare you, but you could end up paying a lot more than $175 if you mess up. Only you can decide if it's within your abilities. The bumper removal is probably the easiest part of the install. __________________ [09][MB][6-Spd MT][Touring][Stillen Gen III][K&N][Borla CBE][Evo-R] [ArchitTEK Photography]