Quote:
Originally Posted by GaleForce
Good to hear. Glad it wasn't your clutch.
I have a CMC sitting on my bench in the garage. I was told they need to be bench bled before installation. Joe from Z-Speed probably told you that already.
|
With this setup on our car gravity feeding should be sufficient to get most of the air out. That being said I did bench bleed on the final try with this master cylinder I have in there now. You just make more of a mess because the cylinder will want to dump out all fluid down the car. If you have the caps that come with the purchase of a MC you can probably get around this. Unfortunately I did not that time.
Its easy enough to do tho.