That's about the same price I've seen for this job. If you feel like it is worth it then go for it. The demon bolts aren't quite as bad it would seem.
I have a suspicion that a lot of the rounded demon bolts here are due to people not having a 6-point socket SQUARELY seated on the bolt when they go to town on the breaker bar. It's easy to let the socket slip just a bit when you are straining hard and not paying really close attention to the socket's orientation on the bolt. Even a slight angle can really increase the odds of rounding. It's hard to see if it is still flush with the bolt since it is so far down, so having a helper is a great idea.
Anywhoozle, you can save yourself $270 if you just wait until you are settled into your new place and have a couple hours to spare. Use Kroil or PB blaster on the bolts before and they will come right off with a fun screetch sound.
__________________
some mods
|