Quote:
Originally Posted by SILVERKNIGHT7
Just bought and installed the Top Speed exhaust with a Motordyne y pipe and noticed that the collector on the y pipe to the single pipe on my top speed doesn't match up. The Top Speed single pipe is 70mm while the Motordyne is 3inch. It bolts up fine and sounds good but I don't like the fact that I have a 1/4 inch lip which means that the exhaust might not be flowing correctly. I checked out the Tanabe y pip and its OD is 70mm which matches perfectly to my Top Speed exhaust. Should I sell the Motordyne and buy the Tanabe or should I not worry about it??? Any help would be much appreciated.
|
Quote:
Originally Posted by SILVERKNIGHT7
Why don't you like the Top Speed exhaust? It sounds great and fits perfect.
|
If it did, there wouldn't be a need for the OP would there?
Anyways, honestly you're better off getting both the Y Pipe and exhaust from the same company to prevent problems like this from happening. This is the risk you take when ordering different parts from different places. I would call your Top Speed part vendor back and ask if you can swap it for a different one. Either that or sell it and get the matching Y pipe. Or sell the exhaust section and get the Top Speed one. Or sell both and get a complete CBE all at once. There are options, but it will mean you'll need to swap one, the other, or both pieces you have now.
