Quote:
Originally Posted by ChipsWithDips
I was planning on installing mine this evening, and was just getting the tools together to do it. The one thing I'm missing though is 11mm open end wrench. Crap man who the hell uses 11mm bolts.
I skimmed through the instructions but didn't see what part this tool is actually needed on. Can anyone who has done the install tell me? Could I get by with 11mm socket or a crescent wrench or something or is it some tight fit where you can't get those tools in there?
|
All of the hardware used in the RJM Pedals is common imperial nuts and bolts. The bolts in question are 3" long 1/4-20's and require a 7/16 *or* 11mm wrench. That way people can use which ever they have on hand in their tools boxes. You can also use a 7/16 socket without any issue on these openly accessable bolts. These are used on the side tension bolts that lock the sliding center section and also adjust the side-side tension on the fulcrum shaft bearings.