Quote:
Originally Posted by Zat_Zuma
If I remember correctly the Instrumention BCM controls the power to the meters and there is no seperate fuse for the triple meter.
I ran a switched power supply from the under dash fuses and used a "add a fuse" connector from PA or CT for my instrumentation power supplies.
|
Uhoh, well I hope I didnt **** anything up then. Everything else continued to work just fine, I just lost power at that wire. Off to the service manual I go.
What do you mean by a "add a fuse" connector? I was going to probably just run a relay system, but this might be easier.
Thanks
Mitch