Looking for some help because I have almost the same setup as P-Kidd
Here is what I have:
2013 370Z Base (No Bose)
Pioneer AVH-x2500bt
Metra 70-7552 Wiring Harness
Metra Axxess Steering Wheel Control
Metra 40-NI12 Antenna Adapter
Parking Brake Bypass
Started doing the wiring of the Pioneer Harness to the Metra Harness.
Where I am confused is on the instructions for the Metra Axxess Steering Wheel Control. The Metra website does not have instructions for the 2013, so I printed out the 2012.
What seems strange to me is the following:
Gray/Red wire to Pin 16
Gray/Blue wire to Pin 6
Pin 15 of vehicle harness to ground
I have not pulled the stereo out yet, so I am not sure of the wire colors on the vehicle harness.
But looking at the Pins on the Metra 70-7552 Wiring Harness:
Pin 16 = Left Front Speaker -
Pin 6 = Right Rear Speaker +
Pin 15 = Left Rear Speaker +
Am I totally missing something here.
Just doesn't seem right.
So, do you directly splice into the wires on the vehicle side of the harness? Did you have grey/red - red & grey/blue -blue
What do you do for Pin 15?